Table of Contents
Advertisement
10. If you would like the tests to start once 1 ft or 0.305 m distance has been covered, enable One Foot Rollout within
the Settings.
Note: Cannot be used in conjunction with Slope Correction.
11. If you would like to apply DB Scanner slope correction method to the tests, enable Slope Correct within the
Settings.
Note: Cannot be used in conjunction with One foot rollout.
14. If you are intending to use the serial output from the top CAN/Serial port to conduct Online Testing with VBOX
Test Suite or output lap timing parameters, go to Serial Output within the Serial Port Settings and change the
Output Mode to either VBOX Stream (live testing with VBOX Test Suite) or Lap Timing.
Note: Ensure correct hardware connections are made.
15. Press the Exit Button to return to the Accel Test screen.
16. Take the vehicle outside and wait for the VBOX Touch to gain satellite lock.
Quick_Start_Guides_%E2%80%93_VBOX_Touch_V1/Quick_Start_Guide_%E2%80%93_VBOX_Touch_V1%3A_Accel_Mode
https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/VBOX_Touch_V1/
12
Advertisement
Table of Contents
Need help?
Do you have a question about the VBOX Touch V1 and is the answer not in the manual?
Questions and answers