Racelogic VBOX Touch V1 Quick Start Manual page 11

3. When the unit has booted, select the Mode Button and press ACCEL if it is not already selected.
7. Select which Accel screen you would like to be shown (Primary, Secondary or Best Result) by selecting
the Forward and Back arrows on the bottom right of the screen or by swiping the screen left or right.
Primary
8. Select the Settings Button, then the Accel option and choose the Start and End Parameters of the 4 concurrent
tests, by default these are 0–60, 0–100, 0–100–0 and 0–¼ mile.
9. If you would like an audible and visual alert when the Primary test is completed or the target speed is met within a
0-Speed-0 test, enable Alert at End/Target within the Settings.
Quick_Start_Guides_%E2%80%93_VBOX_Touch_V1/Quick_Start_Guide_%E2%80%93_VBOX_Touch_V1%3A_Accel_Mode
Secondary
https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/VBOX_Touch_V1/
Best Results
11