Advertisement
Quick Links
Getting Started
This page contains important and useful information about LabSat 4 (RP), such as box contents and product
registration, product power, media options, etc.
Registration
Please register your LabSat 4 so that Racelogic can continue to provide you with notifications about the latest software
releases and firmware upgrades for your Racelogic product, and offer technical support.
Register your device
here.
What is in the box?
LabSat 4 (RP) (RLLS04-RP) is supplied with:
Product Code
LS04-V1
RLACS354
RLVBACS020-X
RLCAB010LE
RLACS313
RLCAB082-1
https://en.racelogic.support//Product_Info/LabSat_4/LabSat_4_(RP)/LabSat_4_(RP)_-_User_Guide/01_Getting_Started
Quantity
1
1
1
1
1
1
Description
LabSat 4 Unit
Wideband GNSS Extended Filter
Magnetic Antenna with SMA
connector - 3m for use with LabSat
4
Mains power Supply - Lemo 2W
cable (country-specific)
Power cable Lemo 2W plug - Cigar
plug (2-metre cable) Screened
8 GB SD Ultima Pro UHS-1 Memory
Card
SMA Plug - MCX plug
RG174 (1-metre cable)
1
Advertisement
Related Manuals for Racelogic LabSat 4 RP
Summary of Contents for Racelogic LabSat 4 RP
- Page 1 Registration Please register your LabSat 4 so that Racelogic can continue to provide you with notifications about the latest software releases and firmware upgrades for your Racelogic product, and offer technical support. Register your device here.
- Page 2 Paragon Software Free Licence PARAGON-LIC Code Flyer LS-WARR NOTE Warranty Note RLCALUKAS Certificate of Calibration Battery Declaration for international BATTERY DEC shipping Optional Extras Product Code Description RLACS225 GNSS Test Enclosure RLACS278 Passive Rebroadcast Antenna RLACS261 Locking Expansion Connector https://en.racelogic.support//Product_Info/LabSat_4/LabSat_4_(RP)/LabSat_4_(RP)_-_User_Guide/01_Getting_Started...
- Page 3 If you connect LabSat 4 to an antenna that requires a higher bias voltage (e.g. 12 V), you must supply the antenna bias and insert an appropriate DC block at the RF IN connector to avoid damaging the LabSat 4 unit. You can read more https://en.racelogic.support//Product_Info/LabSat_4/LabSat_4_(RP)/LabSat_4_(RP)_-_User_Guide/01_Getting_Started...
- Page 4 LabSat 4 has an internal web server that you can easily access via Ethernet and a standard internet web browser. You can read more about the LabSat 4 Web Server, how to connect to it and how to use it here. https://en.racelogic.support//Product_Info/LabSat_4/LabSat_4_(RP)/LabSat_4_(RP)_-_User_Guide/01_Getting_Started...
- Page 5 • The GNSS monitor is currently only displaying L1 on the display, however, the unit will output all NMEA data regardless of the monitor screen you are viewing. Notice: System Heat Management for LabSat 4 Labsat 4 is equipped with a high-performance processor that generates heat during operation. To manage this heat, https://en.racelogic.support//Product_Info/LabSat_4/LabSat_4_(RP)/LabSat_4_(RP)_-_User_Guide/01_Getting_Started...
- Page 6 • Case Exposure: Do not cover the aluminium case of Labsat 4 to allow proper heat dissipation. • Operating Conditions: Avoid operating Labsat 4 for extended periods in direct sunlight or in environments where the ambient temperature exceeds 40°C (104°F). Following these precautions will help maintain a healthy system temperature of Labsat 4. https://en.racelogic.support//Product_Info/LabSat_4/LabSat_4_(RP)/LabSat_4_(RP)_-_User_Guide/01_Getting_Started...
Need help?
Do you have a question about the LabSat 4 RP and is the answer not in the manual?
Questions and answers