Racelogic VBOX Touch V1 Quick Start Manual page 10

• Accel/Decel Mode: If Alert at End is enabled, the LEDs will flash
• Lap Timing Mode:
◦ The LEDs provide a live reference lap speed comparison (Delta-V).
◦ The LEDs will illuminate
◦ When loading a Track Database file, the progress of the track database update is displayed via the LEDs;
each lit LED will represent 25% of the process with all LEDs extinguishing when the process is complete.
◦ When a Track Layout is changed, the LEDs will briefly flash
◦ When a Finish Line is cleared, the LEDs will briefly flash
◦ When a Standing Start is Enabled or Disabled, the LEDs will briefly flash
• Speed Mode: If a Target Speed LED Alert has been set, the LEDs will flash
• Screenshot: If a screenshot has been saved successfully, the LEDs will illuminate
right to display the progress of writing to the SD card.
• Reset: The LEDs will briefly flash
Setup
1. Connect the power via the Power socket.
2. Insert the SD card into the Side of the Unit. The SD Card Icon should display as green as long as the card has
free space.
Quick_Start_Guides_%E2%80%93_VBOX_Touch_V1/Quick_Start_Guide_%E2%80%93_VBOX_Touch_V1%3A_Accel_Mode
blue during the process of creating a Reference Lap.
green twice when a screen has been reset.
https://en.racelogic.support//Product_Info/Performance_Meters/VBOX_Touch/VBOX_Touch_V1/
green for 0.5 s once the test end criteria are met.
green twice.
green twice.
green twice.
green when the value is reached.
yellow in sequence from left to
10