Table of Contents
Advertisement
Safety
1
About this document
1.1
Applicable documents
All available documents for the product è www.festo.com/sp.
1.2
Product version
This document refers to the following product version:
Product
CPX-AP-A
Tab. 1: Product version
The product version can be determined from the product labelling.
There may be an updated version of this document for these or later product versions
è www.festo.com/sp.
1.3
Product labelling
The product labelling and the Data Matrix Code are printed on the housings of the modules. Scanning
the Data Matrix Code with an appropriate device opens the Festo Internet page with documents
appropriate for the product. Alternatively, the Product Key (11-digit alphanumeric code on the product
labelling) can be entered in the search field è www.festo.com/sp.
1.4
Specified standards
Version
IEC 60204-1:2016-10
IEC 60364-4-41:2005-12
EN 60068-2-6:2008-02
Tab. 2: Standards specified in the document
2
Safety
2.1
Safety instructions
– Only use the product if it is in perfect technical condition.
– Observe the identifications on the product.
– Store the product in a dry environment protected from UV and corrosion. Keep storage times short.
– Before working on the product, switch off the power supply and secure it against being switched on
again.
2.2
Intended use
The product described in this document is intended exclusively for control tasks on machines and
automation systems.
Use the product only as follows:
Festo — CPX-AP-A — 2022-07
Version
Automation system CPX-AP-A from revision 1
EN 60068-2-27:2009-05
EN 60529:1991-10
–
5
Advertisement
Table of Contents
