Econo Operation - Daikin J Series Service Manual

SiBE041101
2.7

ECONO Operation

ECONO Operation

ECONO operation is a function which enables efficient operation
by limiting the maximum power consumption value.
This function is useful for cases in which attention should be paid
to ensure a circuit breaker will not trip when the product runs
alongside other appliances.
To start ECONO operation
1. Press
• " " is displayed on the LCD.
To cancel ECONO operation
2. Press
• " " disappears from the LCD.
Running current and
power consumption
• This diagram is a representation for illustrative purposes only.
* The maximum running current and power consumption of the air conditioner in ECONO
operation vary with the connecting outdoor unit.
NOTE
Notes on ECONO operation
• ECONO operation can only be set when the unit is running.
• ECONO operation is a function which enables efficient operation by limiting the power
consumption of the outdoor unit (operating frequency).
• ECONO operation functions in AUTO, COOL, DRY and HEAT operation.
• POWERFUL and ECONO operation cannot be used at the same time.
Priority is given to the function of whichever button is pressed last.
• If the level of power consumption is already low, ECONO operation will not drop the power
consumption.
20
Operation Manual
.
again.
Normal
operation
ECONO
operation
From start up until set
temperature is reached
Maximum during
normal operation
Maximum during
ECONO operation
Time
Operation Manual
62