Outdoor Unit - RK(X)S42J2V1B
3.2
Removal of Electrical Box
Procedure
Step
1. Disconnect the
connecting wires.
Remove the 3 screws
1
to remove the wiring
fixture.
Then remove the all
screws to disconnect
the power supply
cables and the
connecting wires.
2. Remove the electrical
box.
Release the outdoor
1
temperature thermistor.
2
Lift up the guard net
and remove it.
193
Warning
Be sure to wait for 10 minutes or more after turning off all power
supplies before disassembling work.
Procedure
Connecting
wire
Outdoor temperature thermistor
When reassembling, fasten
the wires with screws on the
terminal board.
Terminal
board
Power
supply
cable
Wiring fixture
(R12192)
(R12193)
Guard net
(R8143)
SiBE041101
Points
Removal Procedure