Parmco PPOV-6B-9 Installation And Operating Instructions Manual page 13

 Replacing the Oven Lamp
WARNING: Ensure that the appliance is turned off before replacing the oven lamp/s
to avoid the possibility of electric shock.
Remove the glass cover of the lamp-holder as shown below.
Remove the lamp and replace with a lamp resistant to high temperatures (300°C) with
the following characteristics.
 Voltage 220 - 240V
 Wattage: 25W
 Type: E14
Disposal
Parmco has a commitment to being environmentally responsible. To avoid potential
negative impacts on the environment, please ensure that this appliance is disposed of
correctly. This product must not be treated as household waste. Instead it should be
handed over to an appropriate collection point for recycling of electrical, electronic and
steel components. Disposal should always be carried out in an environmentally
appropriate manner.
For more detailed information about treatment, recovery and recycling of this product,
please contact your local City Council office.
It is the law in New Zealand that this appliance must be installed by authorised persons.
The installation must comply with all the appropriate New Zealand Standards and
Regulatory Requirements, with particular reference to the New Zealand Electrical
Standards.
Any attempt to install this or any other Parmco product without an authorised person
could result in damage to the product and possible health hazard. Not having an
authorised person install this appliance may result in all associated warranties from
Parmco Appliances being null and void.
IMPORTANT NOTE
4
11