95Xx Emulation Features - Intermec Trakker Antares 2460 Supplementary Manual

C39
To use to view the contents of your 246X's Drive C
VIEW246X.EXE
1. Download firmware version 6.20 to your PC. Make sure that
the same folder as
FLASHLDR.BIN
2. Make sure the 246X is turned off, and connect it to a port on your PC.
3. Open an MS-DOS window on your PC and run
W
current working directory displays the folder with
4. Press to turn on the 246X.
The 246X boots, and you are ready to use
246X's drive C. You can use the help command to display the application options.
When you run
VIEW246X.EXE
which port you want to use on the host PC:
Command Name Syntax
Host Port /comn
(default COM1) where n is:
For example, to select the COM2 port on your PC, enter the following command at the
MS-DOS prompt:
view246X/com2

95XX Emulation Features

Trakker Antares 246X terminals ship with the
application, the terminal operates like a 95XX in Data Entry mode with no application
running.
The following new 95XX features are supported by the
246X with firmware version 6.12 and later:
•
Buffered and transparent display modes are supported. The Display Setting
configuration command (OD) is also supported.
•
You can emulate Accumulate mode so that keypad data can be combined with
scanned data.
The following new 95XX feature is supported by the
246X with firmware version 6.15 and later:
•
Message length headers indicating the length of the message are supported.
Enhanced Application Support
nugget
.
VIEW246X.EXE
, you can also use the following command to select
1 COM1
2 COM2
3 COM3
4 COM4
EM9560.BIN
VIEW246X.EXE
. Make sure the
VIEW246X.EXE
.
VIEW246X.EXE
to view the contents of your
application. With this
application on the
EM9560.BIN
application on the
EM9560.BIN
is in
7