Intermec TE 2000 Installation And Setup Instructions
  1. Manuals
  2. Brands
  3. Intermec Manuals
  4. Touch terminals
  5. TE 2000
  6. Installation and setup instructions

Intermec TE 2000 Installation And Setup Instructions

Hide thumbs Also See for TE 2000:
Table of Contents

Advertisement

Quick Links

Download this manual
Installation and
Setup Instructions
TE 2000t

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TE 2000 and is the answer not in the manual?

Questions and answers

Related Manuals for Intermec TE 2000

Summary of Contents for Intermec TE 2000

  • Page 1 Installation and Setup Instructions TE 2000t...
  • Page 2 The information contained herein is proprietary and is provided solely for the purpose of allowing customers to operate and service Intermec-manufactured equipment and is not to be released, reproduced, or used for any other purpose without written permission of Intermec.
  • Page 3 CV60 Vehicle Mount Computer, and the Avalanche Management Console application. Removed references to the 700 Monochrome Computer. 02/2006 Added information about the SmartSystems application, removed references to iBrowse, iLaunch, and SIP Designer applications. ™ TE 2000 Installation and Setup Instructions...
  • Page 4 ™ TE 2000 Installation and Setup Instructions...

  • Page 5: Table Of Contents

    ............Using Intermec Settings to Configure Networking (700 Color, CK31, CV60) .
  • Page 6 ............Installing a TE 2000 AVA Package onto Your Desktop .

  • Page 7: Before You Begin

    Global Services and Support Warranty Information To understand the warranty for your Intermec product, visit the Intermec web site at www.intermec.com and click Service & Support. The Intermec Global Sales & Service page appears. From the Service & Support menu, move your pointer over Support, and then click Warranty.

  • Page 8: Telephone Support

    More information about configuring TE 2000 terminal emulation and about keypad remapping on your Intermec Computer is in the following publications. These are available as PDF on the Intermec web site at: www.intermec.com. These are also available as printed copies.

  • Page 9: Quick Start

    Installation CD You need the Intermec TE 2000 installation CD (P/N: 235-104-001) and a license key to install the full version of TE 2000. Without a license key, you can only install the demo version. Insert the installation CD into a Windows PC that you are using to install the TE 2000 application onto your Intermec computers.

  • Page 10: Using Intermec Settings To Configure Networking (700 Color, Ck31, Cv60)

    Tap (+) to expand the Communications branch, tap (+) to expand the 802.11 Radio branch, then set its options to match your network. If using a controller such as the Intermec G4000, tap (+) to expand the UDP Plus branch, then provide the IP address of the controller.

  • Page 11: Wavelink Avalanche

    When you enable the package, computers that connect to the Agent will see the update is available and automatically download and install TE 2000. By default, computers search for an Agent once a day and after a warm-boot is performed. The Avalanche console can also send the package on demand.

  • Page 12: Ftp Transfer (700 Color, Ck30)

    TE 2000 files onto your computer. Minimum Settings Necessary for Usability Follow these steps to configure TE 2000 to connect to a host or controller: 1 Access the TE 2000 Main Menu pressing the applicable key sequence:...
  • Page 13 Quick Start Note: If you are attempting to connect through a controller and you see the 3) Direct option, then you need to exit TE 2000, access the Inter- mec Settings control panel applet, and enable UDP Plus before continu- ing your TE 2000 setup.

  • Page 14: Exiting Te 2000

    Tap Exit on the lower left corner of the display, then enter “cr52401” at the Input Password prompt. Tap Yes to close TE 2000. You may also exit TE 2000 through the Set-up Menu. Press [Alt] [M] to access the Set-up Menu or use another method as described earlier. Press [1],then “cr52401”...

  • Page 15: About Using The Te 2000 Application On Intermec Computers

    CV60 Vehicle Mount Computer Quick Start Guide 962-054-072 Installing onto Your Desktop or Laptop The TE 2000 CAB files gets installed from the TE 2000 installation CD. The CAB files need to be installed onto your desktop or laptop into the “C:\Program Files\Intermec\TE2000\*computer*” folder for configuration purposes before you can send them to your handheld, mobile, or vehicle mount computers.
  • Page 16 Installation to install the demo version, then click Continue. If you selected “Evaluation,” go to step 5. 3 For the licensed version, enter information about your order, and your 30-character license key, then click Continue. ™ TE 2000 Installation and Setup Instructions...
  • Page 17 4 Select Yes, I accept this agreement, then click Continue. 5 Clear (uncheck) the packages you are not installing, then click Install to put files into the default “\Program Files\Intermec\TE2000” folder. ™ TE 2000 Installationand Setup Instructions...

  • Page 18: Installing Into The Smartsystems Console

    (Persistent Storage Memory) version 3.15 and an IVA (Intermec Value- Add) build of version 3.00.00.0837. If not, either contact your Intermec representative or go to the 700 Series Mobile Computer User’s Manual for information about these computers. S Check 700 Color Series TE2000 (Version 8.1z) to download files for all three options.

  • Page 19: Installing The Ck30 And Ck31 Package

    S Check CK3x DoubleByte Cab Files to download files just for the CK30 Computer. When the contents of the default “C:\Program Files\Intermec\TE2000” folder appears, double-click the Explore TE2000 Folders shortcut to access files downloaded for the CK30 or CK31 Computers.

  • Page 20: Completing The Installation

    These instructions pertain to installing the TE 2000 application onto the Intermec 700 Color Mobile Computer. Consider any of the following options to load your TE 2000 application onto your 700 Color Computer. S Microsoft ActiveSync (next paragraph) S FTP Server (page 7)
  • Page 21 Files\Intermec\TE2000” location on your desktop, which was installed from your TE 2000 Installation CD. You can also use the VisualBasic script files to send the TE 2000 CAB files to your 700 Color Computer. From your desktop, select Start > Programs >...

  • Page 22: Ck30 And Ck31 Handheld Computers

    Guide. To learn more about the CK31 Handheld Computer, see the CK31 Handheld Computer Quick Start Guide. There are two ways to install the TE 2000 application on the CK30 or CK31, if it is not already installed from the factory: from the CAB file distribution, or with an Avalanche package.
  • Page 23 CK30s or CK31s. The CK30 and CK31 ship with the Avalanche Enabler already installed. The package is provided along with the CAB files in the TE 2000 distribution. Each time the Avalanche Enabler is activated (typically on a warm-boot), the CK30 or CK31 attempts to connect to the Avalanche Agent.

  • Page 24: Cv60 Vehicle Mount Computers

    S Third Party FTP Server Software S SmartSystems (page 11) recommended by Intermec 1 Insert the TE 2000 CD into your desktop or laptop PC and wait for the automatic TE 2000 setup. If the CD does not run the TE 2000 setup automatically, use your desktop Explorer application to access the CD drive, then double-click the SETUP_TE2000.EXE file.

  • Page 25: Configuring Te 2000 On Your Computer

    S A 10/100T network crossover cable or an 802.11 Access Point with a network cable To install the TE 2000 application using an FTP Server, do the following: 1 Configure the CV60 Computer network settings to connect to your desktop.

  • Page 26: Starting The Te 2000 Application

    S If iLaunch is not installed: S Tap Start > Programs > the TE2000 desktop icon. S Tap Start > TE2000 S Tap Start, then the terminal icon in the system tray if the TE 2000 application was previously running. Minimum Settings Necessary for Usability...

  • Page 27: Exiting Te 2000

    Tap Exit on the lower left corner of the display, then enter “cr52401” at the Input Password prompt. Tap Yes to close TE 2000. You may also exit TE 2000 through the Set-up Menu. Press [Alt] [M] to access the Set-up Menu or use another method as described earlier. Press [1],then “cr52401”...

  • Page 28: Entering Server Ip Address

    5 Press [Y] at the Save Parms message to save this change. 6 Enter “cr52401” at the Enter Password prompt to return to the TE 2000 main screen. Your new TE 2000 choice is shown to indicate you are ready to use the TE 2000 application in the new emulation mode.

  • Page 29: Exiting The Te 2000 Application

    S performing a reboot on the CV60 Computer. Entering a Host IP Address You need to set up the TE 2000 application to enter the server IP address of the host computer for communications and you need individual settings for either of these methods. See the TE 2000 Terminal Emulation Programmer’s Guide (P/N: 977-055-008) for additional methods.

  • Page 30: Configuring The Te 2000 Data Stream

    CV60 Computer screen. Do the following to choose another emulation mode: 1 At the initialization screen or anywhere in a TE 2000 session, tap twice on the upper-right corner of the display or via the Software Input Panel (onscreen keyboard) tap [Shift], [Mn], then “TE2000 Menus.”...

  • Page 31: Restarting The Te 2000 Application

    S Press [Alt] [Tab] to terminate the TE 2000 application from the Task Manager. S Go to the TE 2000 Main Menu, press [1], enter “cr52401” for the password, press [6], tap Yes at the “Exit TE2000” prompt. Using Intermec Settings to Configure Computer Options See the Intermec Computer Command Reference Manual (P/N: 073529) for information about the applet.

  • Page 32: Ck31 Handheld Computers

    You can access Intermec Settings while running any application. 1 Tap Start > Intermec Settings, or press C > B > Intermec Settings. 2 When done modifying your device configuration and have saved your settings, tap File > Exit or tap the X in the upper right corner.

  • Page 33: Using Wavelink Avalanche

    Installing a TE 2000 AVA Package onto Your Desktop Assuming licenses were purchased when Wavelink Avalanche was installed, do the following to install the TE 2000 application. Note that “XXXX” denotes a computer, such as the CK30. 1 From the desktop, double-click the Wavelink Avalanche Console icon to launch the Avalanche Management Console.
  • Page 34 4 Click the . . . wizard button to browse for the appropriate .AVA file circled in the following illustration. 5 Browse to the “C:\Program Files\Intermec\TE2000\” folder, select the applicable computer folder, select the applicable TE_XXXX.AVA file, then click Select to close.
  • Page 35 6 Click Next to continue. 7 Click Yes, I agree to accept the license agreement, then click Next to continue. ™ TE 2000 Installationand Setup Instructions...

  • Page 36: Installing A Config Ava Package Onto Your Desktop

    1 From the Avalanche toolbar, select Software Management > Install Soft- ware Package. 2 Click the . . . wizard button to browse for the appropriate .AVA file circled in the illustration on the next page. ™ TE 2000 Installation and Setup Instructions...
  • Page 37 3 Browse to the appropriate folder, select the applicable computer folder, select the applicable XXXXCFG.AVA file, then click Select to close. ™ TE 2000 Installationand Setup Instructions...
  • Page 38 4 Click Next to continue. 5 Click Yes, I agree to accept the agreement, then click Next to continue. ™ TE 2000 Installation and Setup Instructions...

  • Page 39: Configuring The Intermec Settings Using Wavelink Avalanche

    “XXXX” denotes a computer, such as the CK30. To access and configure the Intermec Settings using Wavelink Avalanche, you must have the applicable XXXXCFG.AVA package installed in the Avalanche Management Console. Note that these sample illustrations refer to the CK30.
  • Page 40 1 From the Avalanche Agents tree structure, expand to the applicable XXXXCFG.AVA package, then do a right-click for a pop-up menu. 2 Select Configure Package > XXXX Settings to access the Intermec Set- tings application for this software collection. Click to expand (+) down to the “TE2000”...

  • Page 41: Updating The Computer From The Avalanche Console

    You can dictate when the Avalanche Management Console is to update the computers by doing the following: 1 Select Tools > Client Update Controls to access the Avalanche Client Update Manager, then tap the Scheduled Updates tab. ™ TE 2000 Installationand Setup Instructions...
  • Page 42 Click Add New Update Event to insert the event into the listing in the upper half of the dialog. To remove an event, select that event from the upper half, then click Remove Selected Event. ™ TE 2000 Installation and Setup Instructions...

  • Page 43: Enabling The Package On The Computer

    If you do not already have Microsoft ActiveSync on your desktop or laptop, download this application from the Microsoft web site (www.microsoft.com/downloads) and follow the onscreen instructions for installing it on your desktop or laptop. ™ TE 2000 Installationand Setup Instructions...

  • Page 44: Establishing A Partnership

    Before using a serial cable to establish your partnership between the CK30 or CK31 and your desktop or laptop, you need to adjust the CK30 or CK31 COM port settings to establish serial communications. ™ TE 2000 Installation and Setup Instructions...

  • Page 45: Connecting Your Computer To Your Desktop Or Laptop

    ActiveSync, IrDA, or serial. 2 From the desktop or laptop, wait for the Microsoft ActiveSync application to detect your computer. then set up a new partnership. Click Next to continue. ™ TE 2000 Installationand Setup Instructions...
  • Page 46 Note: If you do not need to synchronize files between your computer and your desktop or laptop, you can select “No” for guest access and skip steps 3, 4, and 5. 3 Optional Click Next to synchronize with this desktop or laptop. ™ TE 2000 Installation and Setup Instructions...
  • Page 47 5 Select (check) the items to synchronize between your computer and your desktop or laptop, then click Next to continue. 6 Click Finish to complete the connection between the computer and your desktop or laptop. ™ TE 2000 Installationand Setup Instructions...
  • Page 48 ActiveSync in the future, place your computer in a dock, then connect the computer to your desktop or laptop using a cable; or take the computer out of the dock, then insert it back into the dock. ™ TE 2000 Installation and Setup Instructions...

  • Page 49: Using Microsoft Activesync To Copy Files

    Explore for the Windows Explorer on your desktop or laptop to access the “\Mobile Device” folder on your computer. 3 From your desktop or laptop, select Start > Windows Explorer, then browse the “C:\Program Files\Intermec\TE2000” path. Do the applica- ble copy instructions below: 700 Color Computers Select any of the following CAB files needed for your computer, right- click for a pop-up menu, then select Copy.

  • Page 50: Using Intermec Smartsystems

    “\SDMMC Disk” folder, then tap the TE_CK31.CAB file to launch the TE 2000 installation. The TE 2000 application executes automatically when the computer is powered on. When installation is complete, press and hold the for about five seconds to perform a warm-boot.
  • Page 51 The DEFAULT.KBD file as created or modified for the handheld, mobile, or vehicle mount computer using the SIP Designer application. The backup settings for the handheld, mobile, or vehicle mount computer. The latest TE 2000 software build. ™ TE 2000 Installationand Setup Instructions...
  • Page 52 ™ TE 2000 Installation and Setup Instructions...
  • Page 54 Corporate Headquarters 6001 36th Avenue West Everett, Washington 98203 U.S.A. tel 425.348.2600 fax 425.355.9551 www.intermec.com TE 2000t Installation and Setup Instructions *962-055-010E* P/N 962-055-010 REV E...

Table of Contents