Support For The Euro Symbol; Modifications For Configuring Through The Network; Enhanced Application Support; View246X.exe Application - Intermec Trakker Antares 2460 Supplementary Manual

Trakker Antares 246X Stationary Terminal User's Manual Addendum

Support for the Euro Symbol

Trakker Antares terminals use an English and Western European font set that supports
languages such as French, German, Italian, Portuguese, and Spanish. With firmware
version 6.13 and later, the font set supports the Euro symbol (
The next table contains more information about the Euro symbol. The terminal keys and
the decimal, scan code, and hexadecimal values are the same for all keypads and
overlays.
Character
¼
Note: The Euro symbol (

Modifications for Configuring Through the Network

When you install the terminal in a network, you need to configure a set of network
parameters that control how the terminal communicates in the network. With firmware
version 6.13 and later, you can modify most RF network parameters through the
network, except for the following parameters:
•
•
•
•
You can still modify these parameters as indicated in Chapter 8, "Configuration
Command Reference" in your user's manual.

Enhanced Application Support

This section describes new and modified applications and application support.

VIEW246X.EXE Application

Trakker Antares firmware version 6.20 and later includes the
application. If you have a 246X terminal with firmware version 6.15 or later, you can
run
terminal's Drive C.
6
Terminal Keys

¼ UHSODFHV WKH SUHYLRXV V\PERO DW GHFLPDO YDOXH 
DHCP
Network Activate
TCP Maximum Retries
TCP/IP Maximum Transmit Timeout
on your PC and use this application to view the contents of your
VIEW246X.EXE
Decimal Scan Code
213 5C
¼ 
Hexadecimal
D5
VIEW246X.EXE