Troubleshooting Psk And Ezbuilder Applications - Intermec Trakker Antares 2460 Supplementary Manual

C39
UPC/EAN Enhancements (continued)
8. (Optional) Scan one of these bar codes to set the seventh digit:
9. Scan this bar code:

Troubleshooting PSK and EZBuilder Applications

When you run PSK or EZBuilder applications and there is no RAM drive configured,
you may see one of these messages:
SCREEN ERROR: 30
Code: 9
Hit any key To exit!
SCREEN ERROR: 31
Code: 3
Hit any key To exit!
To solve this problem, you need to set the RAM Drive Size configuration command.
For details about configuring RAM Drive Size, see your user's manual.
Troubleshooting PSK and EZBuilder Applications
nugget
Note: If you discard the number system digit, one leading digit is discarded from
UPC-A, UPC-E, and EAN-8, and two leading digits are discarded from EAN-13.
Discard Leading Zero for UPC-A
*0*
*0*
Note: This option applies only when you enable UPC-A/EAN-13.
Exit Accumulate Mode
*-/*
*-/*
Transmit Leading Zero for UPC-A
*1*
*1*
23