Table of Contents
Advertisement
Interval
Where?
EN
DH35V
44
What?
How?
The transmission can be subjected to a visual inspection rela-
tively easily. For this purpose, the gear head does not have to be
disassembled, or largely disassembled.
Img. 6-4:
Transmission cover
Drain the oil
Fully unscrew the mounting screws of the cover.
Slightly twist the cover in the sealing seat.
Then use the mounting screws to press the cover off the
seal.
Obligations of the operating company on page 12
ATTENTION!
Parts may fly off at high speed. When disassem-
bling the key housing, please make sure that the
machine is only maintained and prepared by quali-
fied staff.
Translation of original instruction
Electronics on page 17
Seal
Cover for
visual inspection
Maintenance
Version 1.0.2 - 2020-07-06
Advertisement
Table of Contents
