8545-0194-01 v1.0
The ST100 board also has the option for the user to use an external serial port.
Under VAR setup and configuration, and normal use by the end user, communication with the device is via a Bluetooth Low
Energy (BLE) GATT/Modem interface with a mixture of ASCII and binary command/query protocols. The ST100 PCB weighs
~6.2g (with shield, no battery, no solar panel), with the dimensions shown below:
1.4. CERTIFICATIONS
Our products comply with WEEE and RoHS. The ST100 has the following certifications:
•
Bluetooth LE
•
FCC
•
ISED
•
CE RED
ST100 User Manual v1
FIGURE 1 - BOARD PHYSICAL DIMENSIONS
Confidential & Proprietary Information
2