Step 4: Disable The Test Commands; Step 5: Restore The Desired Setup - Globalstar ST100 User Manual

8545-0194-01 v1.0

5.2.4. STEP 4: DISABLE THE TEST COMMANDS.

After turning the power off following the last test, use the configuration application in "advanced" mode to do the following:
• Tap the "auth" button.
• Send the command: "raw aa067600"
• Watch for the ACK, which should be "aa0576" and 2 bytes of CRC

5.2.5. STEP 5: RESTORE THE DESIRED SETUP.

Using the configuration application in "advanced" mode:
• Tap the "auth" button.
• For CW Mode, send the command: "raw aa06fc01"
• Tap the "auth" button.
• Send the command: "setup <ch> <transmit attempts> <min time between attempts> <max time between attempts>"
• NOTE: Factory default settings are: "setup 0 3 60 120"
ST100 User Manual v1 Confidential & Proprietary Information 71