Set Gps Timeout Command; Get Gps Timeout Query; Spot Gen3 Emulation - Globalstar ST100 User Manual

8545-0194-01 v1.0

4.2.2.9. Set GPS Timeout command

This command sets the GPS timeout - the maximum time the unit will attempt to obtain a GPS fix before giving up.
Example response: AA 05 23 [CRC] [CRC]

4.2.2.10. Get GPS Timeout query

4.2.2.11. "SPOT GEN3 emulation.

The ST100 board has the ability to emulate the tracking and messaging modes of a SPOT GEN3 device for particular
applications.
ST100 User Manual v1
SET GPS TIMEOUT COMMAND FORMAT
BYTE BITS PARAMETER
0 0 - 7 Leader
1 0 - 7 Length
2 0 - 7 Command Code
3-4 0 - 15 GPS timeout value
5-6 0 - 15 CRC
GET GPS TIMEOUT QUERY FORMAT
BYTE BITS PARAMETER
0 0 - 7 Leader
1 0 - 7 Length
2 0 - 7 Command Code
3-4 0 - 15 GPS timeout value
GET GPS TIMEOUT QUERY RESPONSE
BYTE BITS PARAMETER
0 0 - 7 Leader
1 0 - 7 Length
2 0 - 7 Command Code
3-4 0 - 15 GPS timeout value
5-6 0 - 15 CRC
Always a value of 0xAA
0x07
0x23 = Set GPS timeout
GPS timeout value in seconds. Must be between
60 and 300 seconds (1 to 5 minutes).
Factory default is 4 minutes (240 seconds)
Always a value of 0xAA
0x5
0x24 = GPS Timeout Query
Always a value of 0xAA
0x07
0x24 = GPS Timeout Query
GPS timeout value in seconds
Confidential & Proprietary Information
DESCRIPTION
DESCRIPTION
DESCRIPTION
35