8545-0194-01 v1.0
4.1.1.35. "sghltint"
Health Check read or set message interval.
Command:
Arguments:
Example1:
Example1 response:
Example2:
Example2 response:
4.1.1.36. "sglogpar"
Lists the current logging parameters.
Command:
Arguments:
Example1:
Example1 response:
Logging Overflow status: 1
Example2:
Example2 response:
Logging Overflow status: 1
Wrote logging parameters to flash (When set/get flag is set to "1")
ST100 User Manual v1
sghltint
Set/Get flag:
"0" gets the current interval
"1" sets the interval
Interval:
Number of days between messages, integer between 1 and 30
sghltint 0
Health check interval: %u, Next time to transmit: %u
sghltint 1 25
Successfully set the health check interval
sglogpar
Set/Get flag:
"0" gets the logging parameters
"1" sets the logging parameters
Logging Mode: Only valid when set/get flag is set to "1".
Possible logging modes: 0 -> reduced mode
Logging Overflow: Only valid when set/get flag is set to "1".
Possible overflow modes: 0 -> Overflow disabled
sglogpar 0
Logging Mode: 1
sglogpar 1 1 1
Logging Mode: 1
Confidential & Proprietary Information
1-> basic mode
2-> verbose mode
1-> Overflow enabled
28