Sgactskip 0; Sgadprfx 0; Sgbattemp - Globalstar ST100 User Manual

8545-0194-01 v1.0
4.1.1.31. "sgactskip"
Bypass or reinstate the activation algorithm of ST100. Mostly used for line powered devices.
Command:
Arguments:
Example1:
Example1 response:
Example2:
Example2 response:
4.1.1.32. "sgadprfx"
Set or get the BLE advertising prefix of ST100.
Command:
Arguments:
Example1:
Example1 response:
Example2:
Example2 response:
NOTE: The advertising prefix must be of 3 bytes length. If it is not 3, then "Length error argv[2]" will be returned.

4.1.1.33. "sgbattemp"

Set or Get battery temperature configuration values.
Command:
Arguments:
ST100 User Manual v1
sgactskip
Set/Get flag: "0" gets the current skip activation state
"1" sets the current skip activation state
Skip activation state: Only valid when set/get flags is set to "1"

sgactskip 0

Current skip activation state: 0
sgactskip 1 1
Wrote skip activation flag to flash
sgadprfx
Set/Get flag: "0" gets the prefix and "1" sets the prefix Advertising
Prefix: Only valid when the set/get flag is set to "1"

sgadprfx 0

Adv prefix: gst
sgadprfx 1 gst
Wrote adv prefix
sgbattemp
Set/Get flag:
Charging temp low:
Charging temp high:
Discharging temp low:
Discharging temp high: Only valid when Set/Get flag is set to 1".
Confidential & Proprietary Information
"0" gets the battery temperature config parameters
"1" sets the Battery temperature config parameters
Only valid when Set/Get flag is set to "1".
Low threshold for charging temperature. Min Value
Only valid when Set/Get flag is set to "1".
High threshold for charging temperature
Only valid when Set/Get flag is set to "1".
Low threshold for discharging temperature.
High threshold for discharging temperature
26