Query Setup (0X07) - Globalstar ST100 User Manual

8545-0194-01 v1.0
Where:
• RF channel :
• # of bursts:
• Minimum Burst Interval:
• Maximum Burst Interval:
Example Command:
Where the setup information is:
• RF channel :
• # of bursts:
• Minimum Burst Interval:
• Maximum Burst Interval:

4.2.2.7. Query Setup (0x07)

The Query Setup command requests the ST100 BOARD to return the current setup parameters.
0x07
LEADER LEN
AA 05
Command: AA 05 07 66 B0
HEADER LEN CMD
AA 0E 07 XX
Where:
• RF channel :
• # of bursts:
• Minimum Burst Interval:
• Maximum Burst Interval:
Example Response:
ST100 User Manual v1
Valid values are: 0 = Channel A, 1 = Channel B, 2 = Channel C
Valid values are: 0x01 thru 0x05 (1 to 5 bursts)
Units of 5 seconds. Valid values are: 0x01 thru 0x3C (5 to 300 seconds)
Units of 5 seconds. Valid values are: 0x02 thru 0x78 (10 to 600 seconds)
AA 0E 06 00 00 00 00 00 03 18 30
00 Channel A
03 3 bursts per message
18 0x18 = 24, 24 x 5 = 120 seconds
30 0x30 = 48, 48 x 5 = 240 seconds
CMD CRC1
07 66
RESERVED RF CHANNEL
XX
XX XX XX
Valid values are: 0 = Channel A, 1 = Channel B, 2 = Channel C
Valid values are: 0x01 thru 0x05 (1 to 5 bursts)
Units of 5 seconds. Valid values are: 0x01 thru 0x3C (5 to 300 seconds)
Units of 5 seconds. Valid values are: 0x02 thru 0x78 (10 to 600 seconds)
00 03 18 30
AA 0E 07 00 23 18 60
00 CE 9C
CRC2
B0
# OF BURSTS INTERVAL MIN
XX
00 5D 60
Confidential & Proprietary Information
INTERVAL MAX RESERVED CRC1
XX XX
CRC2
XX 18 59
33