Configuring The Backlight And Screen Brightness - Intermec CK1 User Manual

Chapter 2 — Configuring the CK1

Configuring the Backlight and Screen Brightness

The following procedure explains how to configure:
• the backlight.
• the screen brightness.
To configure the screen
1 From the System Setting screen, press
Screen icon, and press Enter. The Screen screen appears.
2 Under Backlight, press
off, or Auto-off after, and then press Space to select the
setting.
Note: Having the backlight always on decreases battery life.
3 If you select Auto-off after, press
the number of seconds the CK1 needs to be idle for the
backlight to turn off. The options are 5, 10, 20, 30, or 45
seconds.
4 Press
5 Press
toward MIN to brighten the screen or toward MAX to
darken the screen.
6 Press Enter to save your changes (or press S1 and then Esc to
discard your changes). The System Setting screen appears.
7 (Optional) Configure other CK1 functions.
30
Setting
UG
SCREEN
Backlight
Always on.
Always off.
Auto-off after
5 10 20 30 45 seconds.
X
Brightness
MIN MAX
to move to Brightness.
or to set the brightness. Move the slide rule
CK1 Handheld Computer User's Manual
to highlight the
to highlight Always on, Always
and then to choose