Starting An Application From The Top Level Screen; Automatically Running An Application On The Ck1 - Intermec CK1 User Manual

Chapter 3 — Developing and Using Applications
Note: To see a sample command with all the variables filled
in, see Step 3 in "Automatically Running an Application on
the CK1" at the bottom of this page.
12 At the Telnet prompt, send the following command to the
CK1:
chmod 755 application
where application is the name of the application you loaded
on the CK1. This command sets the application with the
correct attributes to run on the CK1. You only need to send
this command the first time you send an application to the
CK1.
13 At the Telnet prompt, send the following command to the
CK1:
sh /var/FILECRON
The application icon appears on the CK1 top level screen. You
can now use the application.

Starting an Application From the Top Level Screen

An icon appears on the top level screen for each application you
load on the CK1, as described in the previous section. This
section explains how to start an application manually from the
top level screen.
To start an application from the top level screen
• From the top level screen, press
the application. Press Enter. The application starts.

Automatically Running an Application on the CK1

You can choose one application to automatically run when you
turn on the CK1 by editing the .icondata.ini file on the CK1.
Note: Only one application can automatically start when you
turn on the CK1.
50
or to select the icon for
CK1 Handheld Computer User's Manual