Toro 137-1019 Installation Instructions Manual page 3

Figure 6
Figure 7
3
Installing the Wiper Mount
Assembly
Parts needed for this procedure:
1 Wiper mount assembly
1 Wiper mount assembly foam
2
Carriage bolt (5/16-18 x 3/4 inch)
2 Nut (5/16 inch)
3 Hex-head bolt (5/16-18 x 3/4 inch)
2 Bolt (1/4-20 x 1/2 inch)
g253028
2
Nut (1/4 inch)
Procedure
1. Install the wiper mount onto the cab frame using
2 carriage bolts (5/16-18 x 3/4 inch), 2 nuts (5/16
inch), and 3 hex head bolts (5/16-18 x 3/4 inch)
as shown in
g253029
3
Figure 9.
Figure 8
g253033