Advertisement
8
Removing the CVT Cooling
Duct (HDX-Auto Machines
only), Coolant Tank, and
Seat Shroud
No Parts Required
Removing the CVT Cooling Duct
For HDX-Auto Machines Only
Remove the hose clamp securing the CVT-cooling
duct to the flange of the CVT intake at the back of the
ROPS panel on the passenger side
Figure 31
1. CVT-intake hose
2. Hose clamp
(Figure
31).
g024791
3. Intake-tube connector
Removing the Coolant Tank
1.
Lift the coolant tank up and out of the support
pocket on the back of the seat shroud
32).
1. Coolant tank
2. Coolant-tank bracket
2.
Set the coolant tank upright onto the
engine/chassis.
Removing the Seat Shroud
For Workman HDX machines:
1.
Ensure that the parking brake is engaged
(Figure
33).
1. Gear-selector boot
2. Gear-selector rod
3. Parking brake
2.
Move the differential-lock rod forward and to the
right to lock it in the engaged position
33).
For Workman HDX-Auto machines:
10
(Figure
Figure 32
3. Seat shroud
Figure 33
4. Differential-lock rod
5. Hydraulic-bed lift rod
6. High-low range shifter rod
(Figure
g023166
g023171
Advertisement
