Advertisement
1. Screw
Removing the Center Console
Panel
For Workman HDX-Auto Machines
1.
Remove all the knobs from the console levers
and from the transmission lever by rotating the
knobs counterclockwise
1. Brake lever
2. Hydraulic-lift lever knob
3. Speed-range lever knob
4. Transmission lever knob
Figure 27
2. Cover plate
(Figure
28).
Figure 28
5. Transmission lever (L
position) knob
6. Hydraulic-lift lock (locked
position—left)
7. Speed-range lever (A
position)
2.
Remove the 4 hex-head screws securing the
shift-indicator cover to the seat shroud
29).
g023165
1. Indicator connector
2. Shift-indicator cover
3. Hex-head screws
3.
Lift the shift indicator up, disconnect the
indicator connector from the machine harness
connector, and remove the indicator cover from
the machine
4.
Remove the 6 hex-head screws securing the
control cover to the seat shroud, and remove the
control cover
Removing the Seats
Remove the 8 socket-head bolts securing the seat
rails of the seat to the chassis, and remove the seats
(Figure
30).
g024571
1. Socket-head bolts
2. Seat rail
9
Figure 29
4. Control cover
5. Machine harness
connector
(Figure
29).
(Figure
29).
Figure 30
3. Seat
(Figure
g024588
g023164
Advertisement
