Advertisement
4.
Connect the 122 cm (48 inches) clear tube to
the 33 cm (13 inches) clear tube and 43 cm (17
inches) clear tube using the tee fitting
58).
Figure 58
1. Passenger's side clear
tube—122 cm (48 inches)
2. Tee fitting
3. Floor clear tube—33 cm
(13 inches)
(Figure
g245855
4. Driver's side clear
tube—43 cm (17 inches)
5. Water gutter
5.
Starting from the passenger's side, route the
connected clear tube down through the floor
board (with the clutch pedal) to the driver's side
of the machine
6.
Secure the connected clear tube with the 3
magnetic tie-wrap mounts and 3 cable ties
(Figure
59).
1. Routed connected tubes
7.
Pinch each end of the clear tube and cut it at a
45° angle
(Figure
8.
Align the clear tube with the bottom of the water
gutter so that the top of the angle is to the
outside of the machine and install it
19
(Figure
59).
Figure 59
2. Cable ties and magnetic
tie-wrap mounts
60).
(Figure
g245856
60).
Advertisement
