Toro 137-1019 Installation Instructions Manual page 8

Figure 23
4. Drill the holes into the roof using a 5/16 inch drill
bit (Figure 24).
Figure 24
5. Install the roof using 2 bolts (1/4-2- x 1 inch) and
2 washers (Figure
Figure 25
25).
7
Removing the Center
Console Panel and Seats
No Parts Required
Removing the Center Console
Panel
For Workman HDX Machines
1. Unscrew and remove all the knobs from the
console levers and from the gear-shift lever
(Figure 26).
g253025
g253012
1. Shifter rod
2. Jam nut
3. Shifter handle
2. Remove the jam nut from the gear-shift lever
(Figure 26).
3. Remove the 6 screws securing the outside edge
of the cover plate of the center console to the
chassis and remove the cover plate
g253017
8
Figure 26
4. Control rod
5. Control knob
(Figure
g023161
27).