Advertisement
Figure 37
1. Fender strap
2.
Install the inner fender and fenders straps using
6 hex-head flange bolts (1/4 x 3/4 inch) and 6
flange nuts (1/4 inch) as shown in
Figure 38
1. Inner fender
2. Flange nut (1/4 inch)
g245709
2. Edge of the seat base
frame
Figure
38.
g245710
3. Fender strap
4. Hex-head flange bolt (1/4
x 3/4 inch)
3.
Fold down the flap and tuck the flap behind the
floor flange
(Figure
4.
Secure the flap with 2 cable ties around the
center frame tube
1. Cable tie
5.
Install a rubber bumper using a washer and
flange nut (1/4 inch) on each side
1. Rubber bumper
2. Washer
12
39).
(Figure
39).
Figure 39
2. Flap tucked behind the
floor flange
(Figure
Figure 40
3. Flange nut (1/4 inch)
g245761
40).
g245762
Advertisement
