Auto Inversion Time Setting - Yamato RE202-A/212-A Instruction Manual

Set time interval for auto inversion mode.
Setting range: 5-999 sec
Default setting is "5"
1. Enter user setting
Fwd Rev
Press 2 sec
2. Change auto inversion time
setting
Fwd Rev
①
Fwd Rev
③
3. Exit user setting
Fwd Rev
① Press the Power key.
②
AutoR Sync
② ①
① Turn the Encoder dial and select "SEC".
② Press the Encoder dial.
③ Turn the Encoder dial to set desired time
AutoR Sync
④ Press the Encoder dial to finalize.
②
①
AutoR Sync
④
③
After completing the setting, press the Encoder dial for
two seconds. Display reverts to previous screen and
shows current rpm.
AutoR Sync
Press 2 sec
4. OPERATION PROCEDURES
Press the Encoder dial for two seconds while current
rpm is on the screen.
Unit enters user setting.
RPM display: "SEC" flashes
RPM display: Current setting flashes
Setting range: 5-999 sec
27

Auto Inversion Time Setting