Control Unit; Display Characters - Yamato RE202-A/212-A Instruction Manual

①
⑦
⑥
④
③
No. Panel item
①
RPM display
②
Power key
③
Run/Stop key
④
Run/Stop lamp
⑤
Encoder dial
⑥
Fwd lamp
⑦
Rev lamp
⑧
AutoR lamp
⑨
Sync lamp
All characters displayed when making settings are defined as follows
Character
2. COMPONENT NAMES AND FUNCTIONS
Fwd
⑤
Letters
Indicates rotation mode setting.
rot
See "Rotation Modes" (P. 26)
Indicates time setting for automatic inversion.
SEC
See "Timed Auto Inversion Mode" (P. 27)
Indicates setting of the behavior of unit at power loss restoration.
Pon
See "Auto-resume Function" (P.28)
Indicates LED brightness setting.
dSP
See "LED Brightness Setting" (P.29)
Indicates communication setting for vacuum controller VR102.
di
See "Vacuum Controller Connection" (P.30)
Rev AutoR
Shows rotation speed reading and setting, and each
parameter.
Press to turn ON (|) or OFF (○) power.
Press to start or stop rotation.
Illuminates during operation.
Turn to increase or decrease set value, scroll items in user
setting, and press to switch or finalize settings.
Forward lamp; illuminates in forward rotation mode
Reverse lamp; illuminates in reverse rotation mode
Auto Rotation lamp; illuminates in auto inversion mode
Synchro lamp; not used for this unit.
Description
11
⑧
⑨
Sync
②
Description

Display Characters

Control Unit