Specifications - Yamato RE202-A/212-A Instruction Manual

Model
Operating
ambient
temperature
Performance
range
*1
Speed range
Evaporation
capacity
RPM display
Rotation mode
Functions
Spring-loaded
jack
Rotary motor
Configuration
Condenser
retention
Safety functions
Cooling
condenser
Compatible
evaporation
flask
Compatible
Standard
receiving flask
External
dimensions *2
Overall
dimensions *2
(Including bath)
Power rating
Power cable
Weight
Accessories
*1 Performance data above based on 23 ±5 °C room temperature, 65%RH ±20% humidity, and no process load.
*2 Dimensions do not include protrusions.
*3 Applicable rotation speed range and sample volume depend on the capacity of evaporation flask.
Evaporation flask
capacity
50-500 mL
1000 mL
2000 mL
RE202-A/212-A
---
(Max. height 200 mm, stepless regulation, one-touch lock)
Retaining bracket for vertical condenser (condenser type B)
[DC motor]
Motor overload protection, overvoltage, low voltage, rotation speed sensor error
[AC adapter]
Short circuit in internal circuit, overcurrent protection, overvoltage protection
---
---
---
375W×445H×324D
---
Approx. 7.0 kg
[Main unit]
Instruction manual (1), warranty card (1), AC adapter (1), power cable (1),
bath guide (1), rear cover (1), single-sided tape fastener roll (1), double-sided tape
fastener roll (1), condenser bracket (1), hex wrench (1)
[Glass set]
Cooling condenser (type A/B)(1), rotary joint (1), evaporation flask (1),
receiving flask (1), ball joint clamp (1), flask clip (1),
vacuum seal (1), condenser insulation kit (1), flask removal tool
Liquid samples
Sample volume (mL)
Flask capacity ÷ 2

10. SPECIFICATIONS

RE202A-A/212A-A
5-35 °C
5-315 rpm *3
Digital display/Encoder dial setting
Forward/Reverse/Auto inversion
Manual balance
DC brushless (simple servo)
Double corrugated tube
(cooling surface: 0.143 m
Suction port: GL-14
(lower), Φ10 nozzle
Cooling port: GL14 (two places in lower part), two
φ10 nozzles
50-2000ml for
* Use optional reducer to attach small flasks.
100-2000 mL
719W×324D×534H
744W×365D×534H
RE202-A: 100-115 V AC single phase 1 A
RE212-A: 100-230 V AC single phase 1 A
Approx. 2.0 m with inlet plug
Approx. 9.0 kg (including RE unit)
Rotation speed Sample volume (mL)
(rpm)
315 Flask capacity ÷ 2
150
39
RE202B-A/212B-A
Up to 23 mL/min
Double corrugated tube
2
) (cooling surface: 0.143 m
Suction Port: GL-14
(upper), Φ10 nozzle
24 (JIS)
529W×324D×745H
554W×365D×745H
Powdery samples
Rotation speed
(rpm)
Not available
2
)
315
150