CAME RBE4024 Installation Manual page 27

• The first available position for storing will appear.
The available positions are the flashing ones.
• Send the code by using the transmitter (even in sequence), the [Sto]
wording will appear to confirm it have been saved.
When the maximum number of users is reached, the wording
[FULL], will appear.
U 2 - Delete users
• Enter the programming, select Delete Users [U2]
and then [1].
• The wording [3000] will appear.
Select the user to delete and press [ENTER]:
• The display will show the [CLr] wording to confirm that the single
user has been deleted. and the corresponding numbering will start
flashing: select the next user or exit the procedure by using [ESC]
U 3 - Delete all users
• Enter the programming, select Delete All Users
[U3] and then [1].
• All stored users will scroll in rapid sequence and
at the end the display will show the [CLr] wording
to confirm that all users have been deleted.
u 2
3 0 0 0
u 3
1 8
1
2 4 5 1
s
1
1 1 2
c l
1
c l