Technical Data - CAME RBE4024 Installation Manual

Technical data

Type
Protection rating (IP)
Power supply (V)
Frequency (Hz)
Stand-by consumption (W)
Maximum power (W)
Relay contact rating - resistive load cosφ=1 (A/V)
Relay contact rating - (A/V) inductive load
Casing material
Operating temperature (°C)
Storage temperature (°C)*
Average life (hours)**
Apparatus class
Weight (Kg)
(*) Before installing the product, keep it at room temperature where it has previously been stored or transported at a
very high or very low temperature.
(**) The average product life is a purely indicative estimate. It applies to compliant usage, installation and maintenance
conditions. It is also infl uenced by other factors, such as climatic and environmental conditions.
Fuses
- Line (mA)
INSTALLING
Fitting
Place the casing where it is protected, and at least fi ve meters from any other receivers; and place the antenna as high
and as far as possible from any metal or reinforced concrete structures.
Use ø 6 cylinder head screws and suitable cable glands to ensure the IP is held fast.
Fit suitable cable glands, by drilling the marked inputs under the control panel.
Be careful not to damage the control board.
RBE4024 RBE4230
54
24 AC/DC 120 - 230 AC
/ 50/60
0.43 0.67 - 0.8
4.4 3 - 3.2
5 / 230 5 / 230
1.5 / 230 1.5 / 230
ABS ABS
-20 ÷ +55 -20 ÷ +55
-25 ÷ +70
100,000
|||
0.55 0.6
RBE4024 RBE4230
315 T 315 T
54
II