Keypad Connection - CAME RBE4024 Installation Manual

Transponder connection

Keypad connection

PROGRAMMING
The key is for
• entering the programming
• entering single menus
• confirming/saving the values you have set
The keys are for
• moving from one item to another
• increasing or decreasing values
The key is for exiting the menus without saving
any changes
Fit the R700 card.
Connect the transponder sensor or the preferred card reader, while
respecting the color code.
 Two transponders connected in parallel, maximum.
Black
Red
Fit the R800 card.
Connect the preferred keypad, while respecting the color code.
 Five keypads connected in parallel, maximum.
Blue
White