CAME RBE4024 Installation Manual page 25

Function Descripton ( the default values appear with a black backdrop )
U 1 Store users. See detail in corresponding chapter.
U 2 Delete users. See detail in corresponding chapter.
U 3 Delete all users. See detail in corresponding chapter.
Code Decoding. For choosing the type of receiving control code:
U 4
Reset. To restore all default parameters.
A 4
[ ]; [ ] Reset.
H 1 Firmware version.
F 12 - Setting the Clock
• Enter the programming, select Setting the
Clock [F12] and then [1].
• They will appear sequentially and flashing ( / to vary,
2 0 1 6
the year (
the time (
the standard time (
the subsequent calibration of the set time (
We suggest that you wait at least one month before checking whether the setting is right.
[ ] All series.
[ ] Only Rolling Code series.
[ ] Only TWIN series
[ ] Keypad.
[ ] Transponder.
When you select a radio code, all saved transmitters will automatically be deleted.
• The TWIN coding lets you save multiple users with the same key (Key block).
1 2
), the month (
2 3
), the minutes (
0
winter time/
to confirm):
3 1
), the day ( ), the day of the week (
5 9
), the seconds (
1
daylight savings time);
0 1
/
f 1 2
5 9
);
to activate it).
1
7
);