Xantrex XPLORE 120A 12V Owner's Manual page 45

Figure 15 AC supply wiring
9. Secure cables in place using tie-wraps or cable straps
according to electrical codes.
10. Tighten the cable glands, if applicable.
975-1038-01-01
11. Replace the wiring compartment cover.
ELECTRICAL SHOCK HAZARD
Replace the wiring compartment cover before turning on
n
power to this equipment.
Use a torque screwdriver to tighten both the captive nut
n
panel screws to 5 in-lb (0.56 N-m) torque to ensure a
required tool access to the wiring compartment.
Failure to follow these instructions can result in death, serious
injury, or equipment damage.
WARNING
31