Otto Bock Myo Plus Quick Manual page 9

Step 10 | Create Basic Set
Optional | Connect a Demo Prosthesis
9 Ottobock | Myo Plus Quick Guide
The quality of the Basic Set is of great importance
It creates the foundation for how the system operates and
recognizes muscle activity patterns.
Click on the arrows for the additional 2 arm positions:
•
Arm Hanging and Arm Extended
For each arm position, record 2 sets of data. When all 6 sets are
•
checked, click on Creating the Basic Set
A basic set can only be created when all 6 recordings
•
have been made
When using a interim prothesis all 6 sets must be recorded
•
1. Connect the Myo Plus Cuff to the demonstration prosthesis
Turn off the cuff and demonstration prosthesis.
•
You will hear a beep.
Place a MyoBock or bebionic terminal device in the wrist
•
connection/lamination ring on top of the demonstration stand
On the cuff, open the button near electrode No. 3,
•
gently pull out the 2-poled cable attached to the Myo Plus TR processor
and close the button again.
Connect the 2-pole cable of the Myo Plus Cuff to the 2-pole
•
socket of the extension cable.