Otto Bock Myo Plus Quick Manual page 7

40% 60%
20%
0%
7 Ottobock | Myo Plus Quick Guide
4. Recording Phase
Perform the indicated
beginning and constantly increasing up to 80% contraction strength.
80%
As the movement is performed, the red bars will start to fill in.
5. Repeat this procedure until all movements have been recorded
Tips
Scroll down and select
change the view for a better evaluation of an actual contraction pattern.
By observing these patterns, you can guide the user in performing the
contraction towards the indicated electrode position (1 to 8)
After both recordings have been performed, make sure that both recording
sets are selected
By scrolling down and clicking on
the recordings and stored temporarily in the Myo Plus Cuff.
When the Myo Plus Cuff is switched off the data will
be erased from the cuff.
The recorded sets are still stored in the Myo Plus App. If you
intend to continue with the same patient you can create a set by
selecting the previously recorded patterns and clicking
movement starting with a contraction from 0% at the
Show Spiderplot instead of MotionClass
.
Create test set
will
, a test set is created from
Create test set .