Otto Bock Myo Plus Quick Manual page 10

Y-cable
10 Ottobock | Myo Plus Quick Guide
Connect both plugs of the Y-cable of the Myo cuff to the free
•
3-pin sockets of the extension cable. NOTE: Use silicone
grease (633F11) before connecting!s Cuff to the free 3-pin
socket of the extension cable.
extension cable
The cable with the blue dot belongs to the port
with a cable tie attached
Attention: Do not remove the cable tie!
2. Establish the connection
It is important to switch the cuff on before starting the Myo Plus app.
•
Do NOT turn on the demo dome yet.
Switch on the Myo Plus Cuff, you will hear 2 short
•
beeps and see a green light
Start the Myo Plus App and establish a Bluetooth connection
•
Login as a clinician
•
Go to menu
•
and MyoBock device and click on
NOW switch on the demonstration prosthesis within 15 seconds.
•
You will again hear 2 short beeps and see a green light.
If the Myo Plus Cuff is connected to the demonstration
•
prosthesis, the app switches to the main menu
and select
Now the terminal device will perform the user's movement
•
and select Myo cuff , choose between bebionic
Connect
Spiderplot / Training