System Specifications - Xantrex Freedom X 2000 Owner's Manual

System Specifications

Table 16 System specifications
a
Transfer relay rating (A )
b
Transfer time (ms )
Shore to inverter:
Inverter to shore:
Transfer voltage (V)
Shore to inverter:
Inverter to shore:
Cooling
Over Voltage Category [OVC]
Safety Protective Class
a
Circuit breakers shall not carry more than 80% of their current rating continuously.
b
To change the AC Transfer time (mode), see Adjusting Settings in Configuration Mode on page 47.
975-0822-01-01
Freedom X 2000 - 230V
30A V
<20 ms
<20 ms with a 20-s delay
<180 V V and >280 V V
<270 V V and >190 V V
Fan, activated by any of the
following:
High internal temperature
High AC output power
Input AC: OVC II
Output AC: OVC II
Class I
Table 17 DC input for inverting
Operating voltage range
Maximum non-operating voltage 25.2 V Z
Nominal voltage
Nominal current at full load
Table 18 AC output for inverting
Output voltage options
a
Continuous power
Continuous current
Surge power (5 s)
b
Frequency
Wave shape
Peak efficiency
Full load efficiency
a
Power derates to 85% when output voltage is set to 220 VV.
b
To set the AC Frequency, see Adjusting Settings in Configuration Mode on page 47.
System Specifications
Freedom X 2000 - 230V
10–17.0 V Z
12.0 V Z
192 A Z
Freedom X 2000 - 230V
220, 230, 240V V
2000 W @ 40 °C
8.3 A V
4000 W
50 (or 60) Hz
True Sine Wave
91%
≥ 87.5%
75