Table of Contents
Advertisement
Product introduction
3. PRODUCT INTRODUCTION
3.1 OVERVIEW
The product is a hydraulically operated crusher. It can be used on any carrier which
meets the necessary hydraulic and mechanical installation requirements.
3.2 REMOVAL FROM PACKAGE
Remove all the steel belts from the package. Open the package and remove all
plastics covering the product. Recycle all package materials (steel, plastic, wood)
properly.
Check that the product is in good condition and that there is no visible damage.
Check that all ordered parts and accessories have been enclosed with the product.
Some options may be provided by your local dealer like installation kits; including
hoses and mounting bracket.
3.3 LIFTING INSTRUCTIONS
Use a hoist when lifting components which weigh 23 kg (50 lb) or more, to avoid
back injury. Make sure all chains, hooks, slings, etc., are in good condition and are
in the correct capacity. Be sure hooks are positioned correctly. Lifting eyes are not
to be side loaded during a lifting operation.
PROVIDED LIFTING POINTS
The lifting eyes located on the Product housing are to be used solely to lift or handle
the Product itself. The lifting capacity calculation is based on Product's working
weight including average sized mounting bracket.
Warning! To avoid falling objects, do not use Product to lift other products.
The lifting eyes located on the Product housing are to be used solely to lift or
handle the Product itself.
The maximum allowed total weight is shown on the Product's CE-plate and
specification page. See "Product specifications" on page 78. If the weight exceeds
the maximum allowed total weight shown on the CE-plate and specification page,
you have to use other lifting points/methods than originally provided on the
Product.
Page 8 - Operation
COPYRIGHT © 2013 SANDVIK MINING AND CONSTRUCTION OY
RD2019 A-JAW, D-JAW, S-JAW, M-JAW
Advertisement
Table of Contents
