RAMMER RD2019 Operator's Manual page 19

Cutter-crasher rammer
Table of Contents

Advertisement

RD2019 A-JAW, D-JAW, S-JAW, M-JAW
HYDRAULIC HOSES AND FITTINGS
Ensure all hydraulic components will withstand maximum pressure and mechanical
stresses caused by operation of the attachment. Consult your local dealer for
instructions.
FIRE HAZARD
Most hydraulic fluids are flammable and might ignite when contacting hot surface.
Avoid spilling hydraulic fluid to hot surfaces.
Working with the product on certain materials can cause sparks and hot splinters to
get loose. These can ignite flammable materials around working area.
Ensure that adequate extinguisher is available.
HYDRAULIC PRESSURE
Hydraulic fluid at system pressure can injure you. Before disconnecting or
connecting hydraulic hoses, stop the carrier engine, operate the controls to release
pressure trapped in the hoses. During the operation, keep people away from the
hydraulic hoses.
There might be pressurized oil trapped inside the product even if it is disconnected
from the carrier. Be aware of possible unexpected jaw movements while greasing
or removing and installing cutting blades.
LIFTING EQUIPMENT
You can be injured if you use faulty lifting equipment. Make sure that lifting
equipment is in good condition. Make sure that the lifting tackle complies with all
local regulations and is suitable for the job. Make sure that the lifting equipment is
strong enough for the job and you know how to use it.
Do not use this product or any of its parts for lifting. See "Lifting instructions" on
page 8. Contact your carrier dealer to find out how to lift with your carrier.
SPARE PARTS
Use only genuine spare parts. Use only genuine cutting blades with crushers. The
use of other spare part or cutting blade brands may damage the product.
EQUIPMENT CONDITION
Defective equipment can injure you or others. Do not operate equipment which is
defective or has missing parts.
Make sure the maintenance procedures in this manual are completed before using
the product.
COPYRIGHT © 2013 SANDVIK MINING AND CONSTRUCTION OY
Safety
Operation - Page 19

Advertisement

Table of Contents
loading

This manual is also suitable for:

A-jawD-jawS-jawM-jaw

Table of Contents