Table of Contents
Advertisement
Routine maintenance
1.4 MAINTENANCE INTERVALS IN SPECIAL APPLICATIONS
The service interval is considerably shorter with special applications. See "Special
conditions of use" on page 38. In special applications, please consult your local
dealer for the correct service intervals.
The cutter-crusher must not be used under water.
1.5 OTHER MAINTENANCE PROCEDURES
WASHING THE ATTACHMENT
When working with attachment and removing it from the carrier, dirt (mud, rock
powder, etc.) can become attached to it. Wash the outside of the product with a
steam washer before sending it to the workshop. Dirt can cause difficulties in
disassembly and assembly otherwise.
CAUTION! Plug the pressure and return line before washing the product or else dirt
can enter into it and this may cause damage to the components.
Page 54 - Maintenance
COPYRIGHT © 2013 SANDVIK MINING AND CONSTRUCTION OY
RD2019 A-JAW, D-JAW, S-JAW, M-JAW
Advertisement
Table of Contents
