Table of Contents
Advertisement
Greasing
SLEW BEARING
1. Grease adequately after every 150 hours of operation.
2. Adapt greasing interval and amount of grease to working conditions.
3. Apply grease from grease gun to grease nipples. It is important to rotate the
slewing ring during lubrication. Complete the lubrication after rotation.
Insufficient greasing or improper grease may cause abnormal wear of parts.
Note: Use only grease specified for slew bearing.
Page 44 - Lubrication
COPYRIGHT © 2013 SANDVIK MINING AND CONSTRUCTION OY
RD2019 A-JAW, D-JAW, S-JAW, M-JAW
Advertisement
Table of Contents
