Replacing Wood Cutting Teeth D-Jaw; Tightening Torque For Wood Cutting; Tooth; Removal Of Wood Cutting Tooth - RAMMER RD2019 Operator's Manual

Replacing wood cutting teeth D-JAW

7. REPLACING WOOD CUTTING TEETH D-JAW
TIGHTENING TORQUE FOR WOOD CUTTING TOOTH
Item
Wood cutting tooth screw

REMOVAL OF WOOD CUTTING TOOTH

Warning! Support the crusher jaw to prevent it from closing unexpectedly
during maintenance.
A used cutting tooth can be recycled. Contact your dealer for more
information about local regulations of recycling.
1. Position the attachment on level ground.
2. Support the crusher jaws.
3. Clean the wood cutting tooth and the base.
4. Open and remove screws, lock washers and nuts.
5. Remove tooth.

INSTALLATION OF WOOD CUTTING TOOTH

1. Clean all parts carefully.
2. Install tooth.
3. Install screws, lock washers and nuts.
Page 68 - Maintenance
Tightening torque
690 Nm (509 lbf ft)
COPYRIGHT © 2013 SANDVIK MINING AND CONSTRUCTION OY
RD2019 A-JAW, D-JAW, S-JAW, M-JAW