Table of Contents
Advertisement
Replacing crushing plate D-JAW
8. REPLACING CRUSHING PLATE D-JAW
TIGHTENING TORQUE FOR PULVERIZING PLATE
Item
Pulverizing plate screws (B)
REMOVAL OF PULVERIZING PLATE
Warning! Support the crusher jaw to prevent it from closing unexpectedly
during maintenance.
A used pulverizing plate can be recycled. Contact your dealer for more
information about local regulations of recycling.
1. Position the attachment on level ground.
2. Support the crusher jaws.
3. Clean the pulverizing plate and the base.
4. Open and remove screws, lock washers and nuts.
Page 70 - Maintenance
Tightening torque
690 Nm (509 lbf ft)
COPYRIGHT © 2013 SANDVIK MINING AND CONSTRUCTION OY
RD2019 A-JAW, D-JAW, S-JAW, M-JAW
Advertisement
Table of Contents
