Replacing crusher teeth D-JAW
6. REPLACING CRUSHER TEETH D-JAW
TIGHTENING TORQUE FOR CRUSHER TOOTH
Item
Crusher tooth screw
REMOVAL OF CRUSHER TOOTH
Warning! Support the crusher jaw to prevent it from closing unexpectedly
during maintenance.
A used crusher tooth can be recycled. Contact your dealer for more
information about local regulations of recycling.
1. Position the attachment on level ground.
2. Support the crusher jaws.
3. Clean the crushing tooth and the base.
4. Open and remove screw, lock washers and nut.
5. Remove tooth.
INSTALLATION OF CRUSHER TOOTH
1. Clean all parts carefully.
2. Install tooth.
3. Install screw, lock washers and nut.
Page 66 - Maintenance
Tightening torque
690 Nm (509 lbf ft)
COPYRIGHT © 2013 SANDVIK MINING AND CONSTRUCTION OY
RD2019 A-JAW, D-JAW, S-JAW, M-JAW