RAMMER RD2019 Operator's Manual page 33

RD2019 A-JAW, D-JAW, S-JAW, M-JAW
10. Place steel frames properly between cutting blades, as shown in the illustration.
Note: If the cutting object does not fit into the crusher mouth, first press it
between the jaws to flatten it and then perform final cutting with cutting blades.
11. Place steel frames deep between cutting blades. Feed force is critical for proper
working result.
12. Make sure the metal object is fully between the cutting blades.
COPYRIGHT © 2013 SANDVIK MINING AND CONSTRUCTION OY
M010075
M010077
Operation - Page 33
Operation