Removal Of Cutting Blades - RAMMER RD2019 Operator's Manual

RD2019 A-JAW, D-JAW, S-JAW, M-JAW

REMOVAL OF CUTTING BLADES

Prior to maintenance or inspection, operate all the control levers to their fully
extended stroke. This will release pressure within the hydraulic piping and
prevent unexpected movement of the jaw and loss of oil through the hydraulic
lines.
Warning! Support the crusher jaw to prevent it from closing unexpectedly
during maintenance.
Used cutting blades can be recycled. Contact your dealer for more information
about local regulations of recycling.
1. Position the attachment on level ground.
2. Support the crusher jaw.
3. Make sure the carrier's transmission is in neutral and the parking brake is
engaged.
4. Stop the carrier engine.
5. Clean the cutting blades and the base.
6. Open hex socket screws. Remove screws and lock washers.
COPYRIGHT © 2013 SANDVIK MINING AND CONSTRUCTION OY
Turning and changing cutting blades S-JAW
Maintenance - Page 59