Changing The Jaws On Site - RAMMER RD2019 Operator's Manual

RD2019 A-JAW, D-JAW, S-JAW, M-JAW

5.2 CHANGING THE JAWS ON SITE

PLACING THE ASSEMBLING STANDS
Item
Tightening screws (A), 8 pcs
Tightening screws (B), 16 pcs
Warning! Place the assembling stands only on flat surface to prevent them
from moving and falling over.
Note: The jaws must be secured to the assembling stand to prevent them from
moving and falling off.
1. Place the assembling stands as shown in the illustration.
COPYRIGHT © 2013 SANDVIK MINING AND CONSTRUCTION OY
A
B
A
B
M010065
Purpose
Fasten the jaw to the assembling
stand for storage or transportation.
Fasten the assembling stand
supports.
M010066
Optional equipment
Operation - Page 23