Memory Channel Screen - Icom IC-756 Instruction Manual

Memory channel screen

The memory channel screen simultaneously shows 9
memory channels and their programmed contents.
You can select a desired memory channel from the
memory channel screen.
• Selecting a memory channel using the
memory channel screen
q If the start up screen is not selected (if [F-5]'s func-
tion is [EXIT]), push [F-5] one or more times to exit.
w Push [
MEMORY] to select the memory chan-
(F-3)
nel screen.
14.195.00
14.205.00 14.205.00
e Rotate the tuning dial while pushing [
select the desired memory channel.
r Push [
EXIT] to exit the memory channel
(F-5)
screen.
• Confirming programmed memory
channels
q Select the memory channel screen as described
above.
w Rotate the tuning dial while pushing [
scroll the screen.
e Push [
SET] to select the highlighted memory
(F-2)
channel, if desired.
" " appears when the memory
channel is selected.
r Push [
EXIT] to exit the memory channel
(F-5)
screen.
• Setting a memory channel as a select
memory
Select memory channels are used for select memory
scan. Select memory scan repeatedly scans the se-
lect memory channels only. This is useful to speedup
the memory scan interval. Of course, select memory
channels are also scanned during normal memory
scan.
q Select the memory channel screen as described
at left.
w Rotate the tuning dial while pushing [
select the desired memory channel.
e Push [
a select memory or not.
SET] to
(F-2)
r Repeat steps w to e to program another memory
channel as a select memory channel, if desired.
t Push [
screen.
NOTE: Setting select memory channels is also
possible in the scan screen.
ROLL] to
(F-1)
MEMORY OPERATION
SELECT] to set the memory channel as
(F-3)
14.195.00
14.205.00 14.205.00
" " appears for select memory channel.
EXIT] to exit the memory channel
(F-5)
5
SET] to
(F-2)
42